Pakistan Hockey Federation (PHF) has lauded National Database and Registration Authority’s role in starting a new era in sports activities in country by verifying the age of less than fewer than 18 hockey players participated in National junior hockey Championship in Karachi. It was stated in a press release issued here on Thursday.
PHF, in a letter to NADRA, said that due to personal interest of Chairman NADRA Ali Arshad Hakeem, NADRA provided dedicated services in screening out over-aged team player.
State of the art technology was deployed in the specially designed “Mobile Registration Vehicle” incorporating biometrics.This will go a long way in reviving the glorious past of Pakistan hockey.
Chairman NADRA Ali Arshad Hakeem said that there has always suspicion over age of some players participating in such tournaments at regional and national level. Verification of the player’s ages from national database would make the player selection transparent for such tournaments.
NADRA was also the main sponsor of this tournament while authority has been actively promoting sports and healthy activities across the country to encourage the players. 10 teams from Karachi participated in the tournament at Pakistan Hockey stadium Karachi.After the verification of 210 players, 15 players had been rejected from the tournament. The verification was completed before the start of the tournament.
Saturday 31 October 2009
The News: Dated 29th October, 2009
National Database Registration Authority (NADRA) Deputy Chairman Tariq Malik is among the five candidates short-listed for the ID Outstanding Achievement Award 2009 that is given to the person who produces the most concrete results in the field of auto ID.
He is in fact the only person outside the United States that has been nominated, as a candidate for the award at ID World International Congress, which is being organized in Milan, Italy from 3-5 November. It is the most comprehensive showcase on the evolving world of RFID, biometrics and smart card technologies.
The other candidates for this award include Roy Braganza who is the Director Airport Services, Remote Check-in — American Airlines, Steve LeBlanc Managing Director — Government Print Office, US, Richard Meyers Principal - Delta Services and Jean-Louis Revol CEO - ID3. All these four are from the United States of America.
He is in fact the only person outside the United States that has been nominated, as a candidate for the award at ID World International Congress, which is being organized in Milan, Italy from 3-5 November. It is the most comprehensive showcase on the evolving world of RFID, biometrics and smart card technologies.
The other candidates for this award include Roy Braganza who is the Director Airport Services, Remote Check-in — American Airlines, Steve LeBlanc Managing Director — Government Print Office, US, Richard Meyers Principal - Delta Services and Jean-Louis Revol CEO - ID3. All these four are from the United States of America.
TENDER NO. 203/2009
TENDER NO. 203/2009
GOVERNMENT OF PAKISTAN
HEADQUARTER NATIONAL DATABASE AND
REGISTRATION AUTHORITY (NADRA)
STATE BANK OF PAKISTAN BUILDING,
SHAHRAH-E-JAMHURIAT, G-5/2.
TENDER FORM FOR LASER ENGRAVING MODULE
Note: (a) Contractors must fill in all the details as required in the form.
(b) Print in black ink use capital letters and appropriate boxes.
M/s________________________________________________
COMPANY NAME AND TAX NO.
Company Name:-
National Tax Card No:- - -
SALES TAX REGISTRATION NO AND REGISTRATION DATE.
Sales Tax Registration No:-
Date of Registration:- - -
OWNER’S NAME AND CNIC NO.
Owner’s Name’s:-
Owner’s National Identity Card No:-
COMPANY’S BUSINESS ADDRESS.
Country:- City:-
Street No :- House No:-
Post Office :- Ward No:-
Tehsil/Sub:- District:-
Province:- Division:-
Telephone #:- Fax No:-
AUTHORIZED SIGNATURE.
(of Executive Director or the person authorized to sign mail for him)
ATTACHMENTS.
Name:- Designation:-
Signature:-
Copy of CNIC
Copy of NTN
Copy of Sales Tax Registration
FINANCE.
Tender Submission Date:- - -
Amount of Ernest Money 2%
Bank Draft/Pay Order No:-
TERMS AND CONDITIONS
1. The price will be quoted on C&F Islamabad
2. The competent authority reserves the rights to accept or reject any or all of the tenders without assigning any reason.
3. The firm should have sales tax registration number.
4. The technical specifications of the Laser Engraving Machine can be collected from the office of Procurement Department at a cost of Rs. 1000/- in cash (Non- refundable).
5. The income tax shall be deducted at source.
6. The Proposal will be accepted in two separate sealed envelopes marked as technical solution and financial proposal. The financial proposal will be opened after the evaluation of the technical solution/proposal.
7. Both the proposal (technical / financial) will be deposited by 1230 hours on 7th October 2009. Technical proposal will be opened at 13:00 the same day in the presence of the vendors. The date of opening of the financial proposal will be intimated to all concerned through fax / telephone.
8. Those firms who are not short listed / technically recommended their financial quotations will not be considered / opened.
9. 2% earnest money of quoted amount will be deposited alongwith quotation/bid in the shape of Bank Draft / Pay order in favour of HQ NADRA Islamabad.
10. The owner/manufacturer outside Pakistan can quote directly in foreign currency. Serial 3,4,5 & 9 will not be applicable to such bidders. Such bidder can obtain the technical specification through email from abdul.qayyum@nadra.gov.pk
SPECIFICATIONS OF LASER ENGRAVING MODULE
1. HARDWARE
Laser medium Nd:YVO4, ¬diode pumped, 1064 nm
Pulse frequency 0 – 100 kHz (programmable)
Pulse width <10 ns /10 kHz
Power HP-configuration 10W; HQ-configuration 8.5W
Positioning help Laser diode incl. software for easy adjustment of the marking position on the work piece (optionally)
Electrical connection 230 V, 50/60Hz, 1.4Kva
Connecting cables 3 m for electric cables (optionally 5 m)
Heat exchanger Air heat exchanger
Ambiant Temperature 15 ¬0C ¬– 35 0C, non condensing
Sound level < 70 Db (A)
Beam Expander RSY LO T 3,0
Expansion 1:3
Marking head RSM G R10
Weight (without lenses) Approx. 2,7 kg
Lens RSM PO 160
Focal length/ field size F = 160mm / 120 x 120 mm (standard)
2. SOFTWARE
The software should be user-friendly program to do the following:-
• Create layouts
• Generation of marking contents
• Graphic editor layout functions such as scaling, grouping and alignment.
3. Delivery time: - 6-8 weeks from date of Purchaser Order
4. Warranty: 12 Months from commissioning
5. The Machine/ Module should have the capacity of integration with NBS personalization system.
6. Quoted price should include Transportation to NADRA Headquarters Islamabad.
7. Quoted price should include extensive training to NADRA, with all Brochures and Manuals.
8. Quoted price should include Installation, Integration, testing and commissioning.
GOVERNMENT OF PAKISTAN
HEADQUARTER NATIONAL DATABASE AND
REGISTRATION AUTHORITY (NADRA)
STATE BANK OF PAKISTAN BUILDING,
SHAHRAH-E-JAMHURIAT, G-5/2.
TENDER FORM FOR LASER ENGRAVING MODULE
Note: (a) Contractors must fill in all the details as required in the form.
(b) Print in black ink use capital letters and appropriate boxes.
M/s________________________________________________
COMPANY NAME AND TAX NO.
Company Name:-
National Tax Card No:- - -
SALES TAX REGISTRATION NO AND REGISTRATION DATE.
Sales Tax Registration No:-
Date of Registration:- - -
OWNER’S NAME AND CNIC NO.
Owner’s Name’s:-
Owner’s National Identity Card No:-
COMPANY’S BUSINESS ADDRESS.
Country:- City:-
Street No :- House No:-
Post Office :- Ward No:-
Tehsil/Sub:- District:-
Province:- Division:-
Telephone #:- Fax No:-
AUTHORIZED SIGNATURE.
(of Executive Director or the person authorized to sign mail for him)
ATTACHMENTS.
Name:- Designation:-
Signature:-
Copy of CNIC
Copy of NTN
Copy of Sales Tax Registration
FINANCE.
Tender Submission Date:- - -
Amount of Ernest Money 2%
Bank Draft/Pay Order No:-
TERMS AND CONDITIONS
1. The price will be quoted on C&F Islamabad
2. The competent authority reserves the rights to accept or reject any or all of the tenders without assigning any reason.
3. The firm should have sales tax registration number.
4. The technical specifications of the Laser Engraving Machine can be collected from the office of Procurement Department at a cost of Rs. 1000/- in cash (Non- refundable).
5. The income tax shall be deducted at source.
6. The Proposal will be accepted in two separate sealed envelopes marked as technical solution and financial proposal. The financial proposal will be opened after the evaluation of the technical solution/proposal.
7. Both the proposal (technical / financial) will be deposited by 1230 hours on 7th October 2009. Technical proposal will be opened at 13:00 the same day in the presence of the vendors. The date of opening of the financial proposal will be intimated to all concerned through fax / telephone.
8. Those firms who are not short listed / technically recommended their financial quotations will not be considered / opened.
9. 2% earnest money of quoted amount will be deposited alongwith quotation/bid in the shape of Bank Draft / Pay order in favour of HQ NADRA Islamabad.
10. The owner/manufacturer outside Pakistan can quote directly in foreign currency. Serial 3,4,5 & 9 will not be applicable to such bidders. Such bidder can obtain the technical specification through email from abdul.qayyum@nadra.gov.pk
SPECIFICATIONS OF LASER ENGRAVING MODULE
1. HARDWARE
Laser medium Nd:YVO4, ¬diode pumped, 1064 nm
Pulse frequency 0 – 100 kHz (programmable)
Pulse width <10 ns /10 kHz
Power HP-configuration 10W; HQ-configuration 8.5W
Positioning help Laser diode incl. software for easy adjustment of the marking position on the work piece (optionally)
Electrical connection 230 V, 50/60Hz, 1.4Kva
Connecting cables 3 m for electric cables (optionally 5 m)
Heat exchanger Air heat exchanger
Ambiant Temperature 15 ¬0C ¬– 35 0C, non condensing
Sound level < 70 Db (A)
Beam Expander RSY LO T 3,0
Expansion 1:3
Marking head RSM G R10
Weight (without lenses) Approx. 2,7 kg
Lens RSM PO 160
Focal length/ field size F = 160mm / 120 x 120 mm (standard)
2. SOFTWARE
The software should be user-friendly program to do the following:-
• Create layouts
• Generation of marking contents
• Graphic editor layout functions such as scaling, grouping and alignment.
3. Delivery time: - 6-8 weeks from date of Purchaser Order
4. Warranty: 12 Months from commissioning
5. The Machine/ Module should have the capacity of integration with NBS personalization system.
6. Quoted price should include Transportation to NADRA Headquarters Islamabad.
7. Quoted price should include extensive training to NADRA, with all Brochures and Manuals.
8. Quoted price should include Installation, Integration, testing and commissioning.
TENDER NO. 212/2009
TENDER NO. 212/2009
GOVERNMENT OF PAKISTAN
HEADQUARTER NATIONAL DATABASE AND
REGISTRATION AUTHORITY (NADRA)
STATE BANK OF PAKISTAN BUILDING,
SHAHRAH-E-JAMHURIAT, G-5/2.
TENDER FORM FOR 10-FINGERPRINT SCANNER (SLAB)
Note: (a) Contractors must fill in all the details as required in the form.
(b) Print in black ink use capital letters and appropriate boxes.
M/s________________________________________________
COMPANY NAME AND TAX NO.
Company Name:-
National Tax Card No:- - -
SALES TAX REGISTRATION NO AND REGISTRATION DATE.
Sales Tax Registration No:-
Date of Registration:- - -
OWNER’S NAME AND CNIC NO.
Owner’s Name’s:-
Owner’s National Identity Card No:-
COMPANY’S BUSINESS ADDRESS.
Country:- City:-
Street No :- House No:-
Post Office :- Ward No:-
Tehsil/Sub:- District:-
Province:- Division:-
Telephone #:- Fax No:-
AUTHORIZED SIGNATURE.
(of Executive Director or the person authorized to sign mail for him)
ATTACHMENTS.
Name:- Designation:-
Signature:-
Copy of CNIC
Copy of NTN
Copy of Sales Tax Registration
FINANCE.
Tender Submission Date:- - -
Amount of Ernest Money 2%
Bank Draft/Pay Order No:-
TERMS AND CONDITIONS
1. The price will be quoted on C&F Islamabad
2. The competent authority reserves the rights to accept or reject any or all of the tenders without assigning any reason.
3. The firm should have sales tax registration number.
4. The technical specifications of the Magnetic Strip Writing Module can be collected from the office of Procurement Department at a cost of Rs. 1000/- in cash (Non- refundable).
5. The income tax shall be deducted at source.
6. The Proposal will be accepted in two separate sealed envelopes marked as technical solution and financial proposal. The financial proposal will be opened after the evaluation of the technical solution/proposal.
7. Both the proposal (technical / financial) will be deposited by 1130 hours on 28th October 2009. Technical proposal will be opened at 12:15 the same day in the presence of the vendors. The date of opening of the financial proposal will be intimated to all concerned through fax / telephone.
8. Those firms who are not short listed / technically recommended their financial quotations will not be considered / opened.
9. 2% earnest money of quoted amount will be deposited alongwith quotation/bid in the shape of Bank Draft / Pay order in favour of HQ NADRA Islamabad.
10. The owner/manufacturer outside Pakistan can quote directly in foreign currency. Serial 3,4,5 &9 will not be applicable to such bidders. Such bidder can obtain the technical specification through email from abdul.qayyum@nadra.gov.pk
SPECIFICATION OF 10-FINGERPRINT SCANNER (SLAB)
Image Quality: - Highest image quality on market (complaint with the FBI-IQS)
Scanning time: - < 2Sec in automatic mode
Mean time between failure: - MTBF in excess of 50, 00 hours
Power Supply: - USB 2.0 capable
Resolution: - 500 dpi (Horizontal and vertical)
Compatibility Window 2000 / XP/ VISTA
SDK VB & C # (.NET) compatible ActiveX Control/SDK including automatic 10 fingers segmentation into WSQ format and Quality function.
GOVERNMENT OF PAKISTAN
HEADQUARTER NATIONAL DATABASE AND
REGISTRATION AUTHORITY (NADRA)
STATE BANK OF PAKISTAN BUILDING,
SHAHRAH-E-JAMHURIAT, G-5/2.
TENDER FORM FOR 10-FINGERPRINT SCANNER (SLAB)
Note: (a) Contractors must fill in all the details as required in the form.
(b) Print in black ink use capital letters and appropriate boxes.
M/s________________________________________________
COMPANY NAME AND TAX NO.
Company Name:-
National Tax Card No:- - -
SALES TAX REGISTRATION NO AND REGISTRATION DATE.
Sales Tax Registration No:-
Date of Registration:- - -
OWNER’S NAME AND CNIC NO.
Owner’s Name’s:-
Owner’s National Identity Card No:-
COMPANY’S BUSINESS ADDRESS.
Country:- City:-
Street No :- House No:-
Post Office :- Ward No:-
Tehsil/Sub:- District:-
Province:- Division:-
Telephone #:- Fax No:-
AUTHORIZED SIGNATURE.
(of Executive Director or the person authorized to sign mail for him)
ATTACHMENTS.
Name:- Designation:-
Signature:-
Copy of CNIC
Copy of NTN
Copy of Sales Tax Registration
FINANCE.
Tender Submission Date:- - -
Amount of Ernest Money 2%
Bank Draft/Pay Order No:-
TERMS AND CONDITIONS
1. The price will be quoted on C&F Islamabad
2. The competent authority reserves the rights to accept or reject any or all of the tenders without assigning any reason.
3. The firm should have sales tax registration number.
4. The technical specifications of the Magnetic Strip Writing Module can be collected from the office of Procurement Department at a cost of Rs. 1000/- in cash (Non- refundable).
5. The income tax shall be deducted at source.
6. The Proposal will be accepted in two separate sealed envelopes marked as technical solution and financial proposal. The financial proposal will be opened after the evaluation of the technical solution/proposal.
7. Both the proposal (technical / financial) will be deposited by 1130 hours on 28th October 2009. Technical proposal will be opened at 12:15 the same day in the presence of the vendors. The date of opening of the financial proposal will be intimated to all concerned through fax / telephone.
8. Those firms who are not short listed / technically recommended their financial quotations will not be considered / opened.
9. 2% earnest money of quoted amount will be deposited alongwith quotation/bid in the shape of Bank Draft / Pay order in favour of HQ NADRA Islamabad.
10. The owner/manufacturer outside Pakistan can quote directly in foreign currency. Serial 3,4,5 &9 will not be applicable to such bidders. Such bidder can obtain the technical specification through email from abdul.qayyum@nadra.gov.pk
SPECIFICATION OF 10-FINGERPRINT SCANNER (SLAB)
Image Quality: - Highest image quality on market (complaint with the FBI-IQS)
Scanning time: - < 2Sec in automatic mode
Mean time between failure: - MTBF in excess of 50, 00 hours
Power Supply: - USB 2.0 capable
Resolution: - 500 dpi (Horizontal and vertical)
Compatibility Window 2000 / XP/ VISTA
SDK VB & C # (.NET) compatible ActiveX Control/SDK including automatic 10 fingers segmentation into WSQ format and Quality function.
TENDER NO. 206/2009
TENDER NO. 206/2009
GOVERNMENT OF PAKISTAN
HEADQUARTER NATIONAL DATABASE AND
REGISTRATION AUTHORITY (NADRA)
STATE BANK OF PAKISTAN BUILDING,
SHAHRAH-E-JAMHURIAT, G-5/2.
TENDER FORM FOR Smart Card Personalization Machine
Note: (a) Contractors must fill in all the details as required in the form.
(b) Print in black ink use capital letters and appropriate boxes.
M/s________________________________________________
COMPANY NAME AND TAX NO.
Company Name:-
National Tax Card No:- - -
SALES TAX REGISTRATION NO AND REGISTRATION DATE.
Sales Tax Registration No:-
Date of Registration:- - -
OWNER’S NAME AND CNIC NO.
Owner’s Name’s:-
Owner’s National Identity Card No:-
COMPANY’S BUSINESS ADDRESS.
Country:- City:-
Street No :- House No:-
Post Office :- Ward No:-
Tehsil/Sub:- District:-
Province:- Division:-
Telephone #:- Fax No:-
AUTHORIZED SIGNATURE.
(of Executive Director or the person authorized to sign mail for him)
ATTACHMENTS.
Name:- Designation:-
Signature:-
Copy of CNIC
Copy of NTN
Copy of Sales Tax Registration
FINANCE.
Tender Submission Date:- - -
Amount of Ernest Money 2%
Bank Draft/Pay Order No:-
TERMS AND CONDITIONS
1. The price will be quoted on C&F Islamabad
2. The competent authority reserves the rights to accept or reject any or all of the tenders without assigning any reason.
3. The firm should have sales tax registration number.
4. The technical specifications of the Smart Card Personalization System can be collected from the office of Procurement Department at a cost of Rs. 1000/- in cash (Non- refundable).
5. The income tax shall be deducted at source.
6. The Proposal will be accepted in two separate sealed envelopes marked as technical solution and financial proposal. The financial proposal will be opened after the evaluation of the technical solution/proposal.
7. Both the proposal (technical / financial) will be deposited by 1230 hours on 15th October 2009. Technical proposal will be opened at 13:00 the same day in the presence of the vendors. The date of opening of the financial proposal will be intimated to all concerned through fax / telephone.
8. Those firms who are not short listed / technically recommended their financial quotations will not be considered / opened.
9. 2% earnest money of quoted amount will be deposited alongwith quotation/bid in the shape of Bank Draft / Pay order in favour of HQ NADRA Islamabad.
10. The owner/manufacturer outside Pakistan can quote directly in foreign currency. Serial 3,4,5 &9 will not be applicable to such bidders. Such bidder can obtain the technical specification through email from abdul.qayyum@nadra.gov.pk
SPECIFICATIONS
SMART CARD PERSOANALIZATION SYSTEMS
a. Polycarbonate and PVC based printing
b. Daily volumes- 20,000-25,000
c. Multiple solution Personalization Options
d. Chip Encoding-72k
e. Magnetic Strip Encoding
f. Laser Engraving
g. Color and B &W Printing
h. Capability of single/Double sided Printing
i. Laminate Module
j. Contact/Contactless Card Encoding (Dual Interface)
k. Personalization, Chip Encoding and Laser Engraving may be done in a single go or Personalization and Laser Engraving in a single go and an additional separate module for ship encoding.
l. Any other suggested features
m. Different suggestion of the available Overt and Covert Security Features that the companies can offer in cards as a part of Personalization or back ground security features on smart cards
n. Automated Quality Assurance
o. Ethernet based connectivity
p. Offer should include training and deployment
q. Delivery time 4-6 weeks
GOVERNMENT OF PAKISTAN
HEADQUARTER NATIONAL DATABASE AND
REGISTRATION AUTHORITY (NADRA)
STATE BANK OF PAKISTAN BUILDING,
SHAHRAH-E-JAMHURIAT, G-5/2.
TENDER FORM FOR Smart Card Personalization Machine
Note: (a) Contractors must fill in all the details as required in the form.
(b) Print in black ink use capital letters and appropriate boxes.
M/s________________________________________________
COMPANY NAME AND TAX NO.
Company Name:-
National Tax Card No:- - -
SALES TAX REGISTRATION NO AND REGISTRATION DATE.
Sales Tax Registration No:-
Date of Registration:- - -
OWNER’S NAME AND CNIC NO.
Owner’s Name’s:-
Owner’s National Identity Card No:-
COMPANY’S BUSINESS ADDRESS.
Country:- City:-
Street No :- House No:-
Post Office :- Ward No:-
Tehsil/Sub:- District:-
Province:- Division:-
Telephone #:- Fax No:-
AUTHORIZED SIGNATURE.
(of Executive Director or the person authorized to sign mail for him)
ATTACHMENTS.
Name:- Designation:-
Signature:-
Copy of CNIC
Copy of NTN
Copy of Sales Tax Registration
FINANCE.
Tender Submission Date:- - -
Amount of Ernest Money 2%
Bank Draft/Pay Order No:-
TERMS AND CONDITIONS
1. The price will be quoted on C&F Islamabad
2. The competent authority reserves the rights to accept or reject any or all of the tenders without assigning any reason.
3. The firm should have sales tax registration number.
4. The technical specifications of the Smart Card Personalization System can be collected from the office of Procurement Department at a cost of Rs. 1000/- in cash (Non- refundable).
5. The income tax shall be deducted at source.
6. The Proposal will be accepted in two separate sealed envelopes marked as technical solution and financial proposal. The financial proposal will be opened after the evaluation of the technical solution/proposal.
7. Both the proposal (technical / financial) will be deposited by 1230 hours on 15th October 2009. Technical proposal will be opened at 13:00 the same day in the presence of the vendors. The date of opening of the financial proposal will be intimated to all concerned through fax / telephone.
8. Those firms who are not short listed / technically recommended their financial quotations will not be considered / opened.
9. 2% earnest money of quoted amount will be deposited alongwith quotation/bid in the shape of Bank Draft / Pay order in favour of HQ NADRA Islamabad.
10. The owner/manufacturer outside Pakistan can quote directly in foreign currency. Serial 3,4,5 &9 will not be applicable to such bidders. Such bidder can obtain the technical specification through email from abdul.qayyum@nadra.gov.pk
SPECIFICATIONS
SMART CARD PERSOANALIZATION SYSTEMS
a. Polycarbonate and PVC based printing
b. Daily volumes- 20,000-25,000
c. Multiple solution Personalization Options
d. Chip Encoding-72k
e. Magnetic Strip Encoding
f. Laser Engraving
g. Color and B &W Printing
h. Capability of single/Double sided Printing
i. Laminate Module
j. Contact/Contactless Card Encoding (Dual Interface)
k. Personalization, Chip Encoding and Laser Engraving may be done in a single go or Personalization and Laser Engraving in a single go and an additional separate module for ship encoding.
l. Any other suggested features
m. Different suggestion of the available Overt and Covert Security Features that the companies can offer in cards as a part of Personalization or back ground security features on smart cards
n. Automated Quality Assurance
o. Ethernet based connectivity
p. Offer should include training and deployment
q. Delivery time 4-6 weeks
TENDER NO. 206/2009
TENDER NO. 210/2009
GOVERNMENT OF PAKISTAN
HEADQUARTER NATIONAL DATABASE AND
REGISTRATION AUTHORITY (NADRA)
STATE BANK OF PAKISTAN BUILDING,
SHAHRAH-E-JAMHURIAT, G-5/2.
TENDER FORM FOR Magnetic Strip Writing Module
Note: (a) Contractors must fill in all the details as required in the form.
(b) Print in black ink use capital letters and appropriate boxes.
M/s________________________________________________
COMPANY NAME AND TAX NO.
Company Name:-
National Tax Card No:- - -
SALES TAX REGISTRATION NO AND REGISTRATION DATE.
Sales Tax Registration No:-
Date of Registration:- - -
OWNER’S NAME AND CNIC NO.
Owner’s Name’s:-
Owner’s National Identity Card No:-
COMPANY’S BUSINESS ADDRESS.
Country:- City:-
Street No :- House No:-
Post Office :- Ward No:-
Tehsil/Sub:- District:-
Province:- Division:-
Telephone #:- Fax No:-
AUTHORIZED SIGNATURE.
(of Executive Director or the person authorized to sign mail for him)
ATTACHMENTS.
Name:- Designation:-
Signature:-
Copy of CNIC
Copy of NTN
Copy of Sales Tax Registration
FINANCE.
Tender Submission Date:- - -
Amount of Ernest Money 2%
Bank Draft/Pay Order No:-
TERMS AND CONDITIONS
1. The price will be quoted on C&F Islamabad
2. The competent authority reserves the rights to accept or reject any or all of the tenders without assigning any reason.
3. The firm should have sales tax registration number.
4. The technical specifications of the Magnetic Strip Writing Module can be collected from the office of Procurement Department at a cost of Rs. 1000/- in cash (Non- refundable).
5. The income tax shall be deducted at source.
6. The Proposal will be accepted in two separate sealed envelopes marked as technical solution and financial proposal. The financial proposal will be opened after the evaluation of the technical solution/proposal.
7. Both the proposal (technical / financial) will be deposited by 1230 hours on 20th October 2009. Technical proposal will be opened at 13:15 the same day in the presence of the vendors. The date of opening of the financial proposal will be intimated to all concerned through fax / telephone.
8. Those firms who are not short listed / technically recommended their financial quotations will not be considered / opened.
9. 2% earnest money of quoted amount will be deposited alongwith quotation/bid in the shape of Bank Draft / Pay order in favour of HQ NADRA Islamabad.
10. The owner/manufacturer outside Pakistan can quote directly in foreign currency. Serial 3,4,5 &9 will not be applicable to such bidders. Such bidder can obtain the technical specification through email from abdul.qayyum@nadra.gov.pk
SPECIFICATION OF MAGNETIC STRIP WRITING MODULE
The Magnetic stripe Encoder CPE is a high throughput element, which write tracks in parallel to maintain the high speed and proper encoding is verified by a secondary read operation.
1. Throughput for Encoder
Up to 1000 cards per hour
(Encoding 3 track ISO with verification)
2. Encoding verified via secondary read operation
3. Software selectable encode retries
4. Availability of Read Back Capabilities
5. Through software the encoder can be configurable to reject a bad card, remake it and continue automatically, or stop the machine and display warning messages.
6. Software selectable coercivity using the machine Printer Driver
7. Integration: The machine/ Module should have the capacity of Integration with NBS Personalization System.
8. Quoted Price should include Transportation to NADRA Headquarter Islamabad.
9. Quoted price should include extensive Training to NADRA, with all Brochures and Manuals.
10. Quoted Price should include Installation, Integration, testing and commissioning.
TENDER INVITATIONS
TENDER NO. 207/2009
GOVERNMENT OF PAKISTAN
HEADQUARTER NATIONAL DATABASE AND
REGISTRATION AUTHORITY (NADRA)
STATE BANK OF PAKISTAN BUILDING,
SHAHRAH-E-JAMHURIAT, G-5/2.
TENDER FORM FOR Smart Card Project Launch
Note: (a) Contractors must fill in all the details as required in the form.
(b) Print in black ink use capital letters and appropriate boxes.
M/s________________________________________________
COMPANY NAME AND TAX NO.
Company Name:-
National Tax Card No:- - -
SALES TAX REGISTRATION NO AND REGISTRATION DATE.
Sales Tax Registration No:-
Date of Registration:- - -
OWNER’S NAME AND CNIC NO.
Owner’s Name’s:-
Owner’s National Identity Card No:-
COMPANY’S BUSINESS ADDRESS.
Country:- City:-
Street No :- House No:-
Post Office :- Ward No:-
Tehsil/Sub:- District:-
Province:- Division:-
Telephone #:- Fax No:-
AUTHORIZED SIGNATURE.
(of Executive Director or the person authorized to sign mail for him)
ATTACHMENTS.
Name:- Designation:-
Signature:-
Copy of CNIC
Copy of NTN
Copy of Sales Tax Registration
FINANCE.
Tender Submission Date:- - -
Amount of Ernest Money 2%
Bank Draft/Pay Order No:-
TERMS AND CONDITIONS
1. . The competent authority reserves the rights to accept or reject any or all of the tenders without assigning any reason.
2. The firm should have sales tax registration number.
3. The technical specifications of the Smart Card Personalization System can be collected from the office of Procurement Department at a cost of Rs. 1000/- in cash (Non- refundable).
4. The income tax shall be deducted at source.
5. The Proposal will be accepted in two separate sealed envelopes marked as technical solution and financial proposal. The financial proposal will be opened after the evaluation of the technical solution/proposal.
6. Both the proposal (technical / financial) will be deposited by 1230 hours on 15th October 2009. Technical proposal will be opened at 13:15 the same day in the presence of the vendors. The date of opening of the financial proposal will be intimated to all concerned through fax / telephone.
7. Those firms who are not short listed / technically recommended their financial quotations will not be considered / opened.
8. The price quoted should include all taxes.
9. 2% earnest money of quoted amount will be deposited alongwith quotation/bid in the shape of Bank Draft / Pay order in favour of HQ NADRA Islamabad.
10. The bidders must provide the proof of ownership/dealership alongwith the technical proposal.
11. The owner/manufacturer outside Pakistan can quote directly in foreign currency. Serial 2,3,4,9 will not be applicable to such bidders. Such bidder can obtain the technical specification through email from abdul.qayyum@nadra.gov.pk
1. Servers
a. Server 1 Quantity 01
These specifications are for branded machines from HP, Dell, IBM or equivalent.
Form Factor Rack
Processor Intel Xeon Processor 7400 series up to 2.66GHz(Six cores)/ 1066 MHz front-side bus
Number of Processors 4
Cache 16MB
RAM 128 GB
Storage Internal: 2 x 146GB, 3Gbps ,SAS, 3.5inch, 15K RPM, Hard Drives with integrated RAID-1
Network interface Integrated dual Gigabit Ethernet
Power Supply Redundant
CD ROM Drive 48X CD ROM Drive
OS 64- bit Red Hat Enterprise Linux
b. Server 2 Quantity 01
These specifications are for branded machines from HP, Dell, IBM or equivalent.
Form Factor Rack
Processor Upto to 02 Quad-Core Processors
Number of Processors Expandable upt2 2
Cache 4MB
RAM 16 GB
Storage 500 GB
Network interface Integrated dual Gigabit Ethernet
Power Supply Redundant
CD ROM Drive 48X CD ROM Drive
OS Linux
2. Database Management System Quantity 01
Oracle Licensing
3. UPS Specifications Quantity 02
Rack-mountable UPS
Form Factor 7.5kVA [or more] Rack-mountable UPS
Backup/Run Time 15 Minute 3.5kW Full Load
Batteries Spill Proof, Maintenance Free Sealed Lead Acid
Emergency Power OFF Yes
4. Rack Cabinet Quantity 01
19” enclosure for rack mountable products with a height of 42U
• Roof Mounted extractor fan-kit
• Anti-tip Stabilizer provides stability and support when equipment is installed, removed or accessed within
• 2 * Metered PDU
• KVM switch with cables
• Keyboard, Mouse 1U and Monitor
5. Mobile Workstations Quantity 35
Integrated mobile enrolment workstations
• Notebook computer with the following indicative specs
• Camera with the following specs
• Fingerprint enrolment device
• Signature pad
• Smart card reader/writer
• Ruggedized casing
• Battery pack
Camera: Canon PowerShot SX110 IS
Resolution 9.0 Mega pixel
Focusing Range Normal: 1.6 ft./50cm-infinity (W), 3.3 ft./1m-infinity (T)
Macro: 0.39 in.-1.6 ft./1-50cm (W)
Storage Media SD/SDHC Memory Card, Multimedia Card, MMC Plus Card, HC MMC Plus Card
Computer interface USB 2.0 Hi-Speed
Shooting Capacity Still Image: approx. 220 shots (AA-size Alkaline Battery), approx. 450 shots (AA-size Ni-MH Battery)*
*LCD screen on. The above figures comply with CIPA testing standards and apply when fully-charged batteries are used.
Playback Time Approx. 300 min. (AA-size Alkaline Battery), approx. 480 min. (AA-size Ni-MH Battery)
Emergency Power OFF Yes
10-Fingerprint Scanner: Morpho Top or Equivalent
Image Quality Highest image quality on market (complaint with the FBI‐IQS)
Scanning time < 2sec in automatic mode
Mean time between failure MTBF in excess of 50,00 hours
Power supply USB 2.0 capable
Resolution 500 dpi (Horizontal and Vertical)
Compatibility Windows 2000/ XP/ VISTA
SDK VB & C # (.NET ) compatible ActiveX Control/SDK including automatic 10 fingers segmentation into WSQ format and Quality check function
Digitized Hand writing Signature Device: Interlink electronics’ ePAD
Touchpad quality Versa Pad Semiconductive
Actuator Type Tethered Stylus
Report Rate 100 Reports per second
Touchpad Resolution 100 counts per inch
Levels of Z-pressure 128
Hardware Interface USB
Dimensions 146mm x 152.4mm x 13.97mm (5.75” x 6.00” x .550”)
Weight 0.263kg
Storage 85% RH Max, non-considering
Power Powered by USB port
System requirements Windows 2000 or XP, available serial port or USB port, CD- ROM Drive
Laptop Specifications: Dell, HP, Lenovo or equivalent
Processors Intel core 2Duo Processor
Operating system Genuine Windows Vista Business Edition
Memory Dual Channel DDR2 Memory, two slots offering upto 8GB
Primary Storage 7200 RPM Free Fall Sensor Hard Drive up to 250GB
Optical drives DVD-ROM, CD-RW/ DVD, DVD+/-RW
Graphic Cards NVIDIA Quadro NVS160M 256MB DDR2
Connectivity 10/100/1000 Gigabit Ethernet network interface adaptor
Intel® Wi-Fi Link 5100 [802.11a/g/n (1x2)]
Display 14.1" Premium, UltraSharpTM WXGA+ (1440x900) LED Display
Weight 4.3 lbs
Power 90 Watt AC adapter with cord wrapping
Chip writers: OMNIKEY 3121 USB
Host Interface Usb 2.0 CCID
Transmission Speed 12Mbps (Usb 2.0 full speed)
Power supply Bus Powered
Smart Card Detection Movement detection with auto power/off, Automatic Detection of smart card type, Short circuit and thermal protection
Sensor Type Authentec RF Field Swipe Sensor
PC/SC Driver Support Windows Vista (32 bit/ 64 bit)
Finger print Driver support Windows XP
Linux
Embedded Technology OMNIKEY Smart Link Chipset
Weight 174 grams
MTBF 500.000 hrs
Mobile Data Enrollment System Casing: (Further details to be specified after more research)
Enclosure
Sealed System: Machined Aluminum case and sealed gaskets protect the system from humidity, corrosion, water spray, and dust.
6. Chip writers: OMNIKEY 3121 USB Quantity 55
(35 to be embedded part of Mobile Workstations, 50 to be installed with Personalization Workstations and 10 units and spare)
Host Interface Usb 2.0 CCID
Transmission Speed 12Mbps (Usb 2.0 full speed)
Power supply Bus Powered
Smart Card Detection Movement detection with auto power/off, Automatic Detection of smart card type, Short circuit and thermal protection
Sensor Type Authentec RF Field Swipe Sensor
PC/SC Driver Support Windows Vista (32 bit/ 64 bit)
Finger print Driver support Windows XP
Linux
Embedded Technology OMNIKEY Smart Link Chipset
Weight 174 grams
MTBF 500.000 hrs
7. Workstations: Dell, HP or IBM Quantity 60
Operating System MS Vista Ready
Processor Intel ® Core™ 2 Duo Processor (2.66Ghz, 4M, 1066MHz FSB)
RAM 4GB DDR2 Non-ECC SDRAM, 800MHz, (2 DIMM)
Network 10/100/1000 Fast PCI Ethernet Adapter Card with Managed PC Boot Agent with remote wakeup
Storage 160GB SATA 3.0Gb/s and 8MB Databurst Cache™
Display 17”LCD Monitor
Keyboard Standard keyboard with no additions
Mouse Same brand as of PC
Power Supply Regulated 110/220V Power Supply
Ports 1 serial, I parallel and 6 high speed (atleast 2 in front) USB Ver. 2ports
Optical Device None
Warranty 3 years warranty on labor and parts starting from onsite installation
8. Network Switch Quantity 04
Specification
24 Port LAN Switches with Ethernet Connectivity
9. Disk Storage Quantity 01 (one of the two options)
Option1:
Requirement
Require enterprise class storage infrastructure supporting our application performance requirements
Dual controllers.
5TB usable. 4TB usable using 146GB 15K RPM FC Drives. And 1TB usable using high performance SSDs (Solid State Drives)
Support for tiering of FC, Flash and SATA drives
Thin Provisioning software is required to automatically assign extra space to an application from what has been physically assigned
32 GB cache
Clones / Snaps are also required for data protection within the storage. Extra storage required for this purpose is already accounted for in the 5TB requirement
Should have minimum 4Gb/sec end-to-end internal architecture including front-end controllers, disks, and back-end controllers
3 year hardware / software warranty and support is required on a 24x7 basis
Option 2:
Requirement
Unified (NAS, SAN, iSCSI) Mid-range storage
Dual controllers
5TB usable. 4TB usable using 146GB 15K RPM FC Drives. And 1TB usable using high performance SSDs (Solid State Drives)
Support for Tiering of FC, Flash and SATA drives
Thin Provisioning software is required to automatically assign extra space to an application from what has been physically assigned
6 GB of cache.
Clones / Snaps are also required for data protection within the storage.
Should have minimum 4Gb/sec end-to-end internal architecture including front-end controllers, disks, and back-end controllers
3 year hardware / software warranty and support is required on 24x7 basis
Optional Items:
Extra Items (Should be quoted as Optional)
Backups software to support 10 clients backup and 1 Oracle database agent
SAN Based Disk library with De-duplication
Dual 8Gb/s SAN Switches (16 Active Ports Each)
3 year hardware / software warranty and support is required on 24x7 and 4 hour response time
Multi-Pathing Software
Automatic Path Failover detection & recovery
Should be able to Load balance when required
Should support Auto Path Discovery
Cluster Support
10. Smart Card Quantity 500,000
Specifications (quotes for both the options may be acquired)
Option I
• 72k Java Card 2.2
• Global Platform compliant
• Support for RSA
• Polycarbonate
Option II
• 72k Java Card 2.2
• Global Platform compliant
• Support for RSA
• Polycarbonate
• Dual Interface
11. Match on card applet Quantity 01
Java Card compliant applet with accurate fingerprint match on card capability
GOVERNMENT OF PAKISTAN
HEADQUARTER NATIONAL DATABASE AND
REGISTRATION AUTHORITY (NADRA)
STATE BANK OF PAKISTAN BUILDING,
SHAHRAH-E-JAMHURIAT, G-5/2.
TENDER FORM FOR Smart Card Project Launch
Note: (a) Contractors must fill in all the details as required in the form.
(b) Print in black ink use capital letters and appropriate boxes.
M/s________________________________________________
COMPANY NAME AND TAX NO.
Company Name:-
National Tax Card No:- - -
SALES TAX REGISTRATION NO AND REGISTRATION DATE.
Sales Tax Registration No:-
Date of Registration:- - -
OWNER’S NAME AND CNIC NO.
Owner’s Name’s:-
Owner’s National Identity Card No:-
COMPANY’S BUSINESS ADDRESS.
Country:- City:-
Street No :- House No:-
Post Office :- Ward No:-
Tehsil/Sub:- District:-
Province:- Division:-
Telephone #:- Fax No:-
AUTHORIZED SIGNATURE.
(of Executive Director or the person authorized to sign mail for him)
ATTACHMENTS.
Name:- Designation:-
Signature:-
Copy of CNIC
Copy of NTN
Copy of Sales Tax Registration
FINANCE.
Tender Submission Date:- - -
Amount of Ernest Money 2%
Bank Draft/Pay Order No:-
TERMS AND CONDITIONS
1. . The competent authority reserves the rights to accept or reject any or all of the tenders without assigning any reason.
2. The firm should have sales tax registration number.
3. The technical specifications of the Smart Card Personalization System can be collected from the office of Procurement Department at a cost of Rs. 1000/- in cash (Non- refundable).
4. The income tax shall be deducted at source.
5. The Proposal will be accepted in two separate sealed envelopes marked as technical solution and financial proposal. The financial proposal will be opened after the evaluation of the technical solution/proposal.
6. Both the proposal (technical / financial) will be deposited by 1230 hours on 15th October 2009. Technical proposal will be opened at 13:15 the same day in the presence of the vendors. The date of opening of the financial proposal will be intimated to all concerned through fax / telephone.
7. Those firms who are not short listed / technically recommended their financial quotations will not be considered / opened.
8. The price quoted should include all taxes.
9. 2% earnest money of quoted amount will be deposited alongwith quotation/bid in the shape of Bank Draft / Pay order in favour of HQ NADRA Islamabad.
10. The bidders must provide the proof of ownership/dealership alongwith the technical proposal.
11. The owner/manufacturer outside Pakistan can quote directly in foreign currency. Serial 2,3,4,9 will not be applicable to such bidders. Such bidder can obtain the technical specification through email from abdul.qayyum@nadra.gov.pk
1. Servers
a. Server 1 Quantity 01
These specifications are for branded machines from HP, Dell, IBM or equivalent.
Form Factor Rack
Processor Intel Xeon Processor 7400 series up to 2.66GHz(Six cores)/ 1066 MHz front-side bus
Number of Processors 4
Cache 16MB
RAM 128 GB
Storage Internal: 2 x 146GB, 3Gbps ,SAS, 3.5inch, 15K RPM, Hard Drives with integrated RAID-1
Network interface Integrated dual Gigabit Ethernet
Power Supply Redundant
CD ROM Drive 48X CD ROM Drive
OS 64- bit Red Hat Enterprise Linux
b. Server 2 Quantity 01
These specifications are for branded machines from HP, Dell, IBM or equivalent.
Form Factor Rack
Processor Upto to 02 Quad-Core Processors
Number of Processors Expandable upt2 2
Cache 4MB
RAM 16 GB
Storage 500 GB
Network interface Integrated dual Gigabit Ethernet
Power Supply Redundant
CD ROM Drive 48X CD ROM Drive
OS Linux
2. Database Management System Quantity 01
Oracle Licensing
3. UPS Specifications Quantity 02
Rack-mountable UPS
Form Factor 7.5kVA [or more] Rack-mountable UPS
Backup/Run Time 15 Minute 3.5kW Full Load
Batteries Spill Proof, Maintenance Free Sealed Lead Acid
Emergency Power OFF Yes
4. Rack Cabinet Quantity 01
19” enclosure for rack mountable products with a height of 42U
• Roof Mounted extractor fan-kit
• Anti-tip Stabilizer provides stability and support when equipment is installed, removed or accessed within
• 2 * Metered PDU
• KVM switch with cables
• Keyboard, Mouse 1U and Monitor
5. Mobile Workstations Quantity 35
Integrated mobile enrolment workstations
• Notebook computer with the following indicative specs
• Camera with the following specs
• Fingerprint enrolment device
• Signature pad
• Smart card reader/writer
• Ruggedized casing
• Battery pack
Camera: Canon PowerShot SX110 IS
Resolution 9.0 Mega pixel
Focusing Range Normal: 1.6 ft./50cm-infinity (W), 3.3 ft./1m-infinity (T)
Macro: 0.39 in.-1.6 ft./1-50cm (W)
Storage Media SD/SDHC Memory Card, Multimedia Card, MMC Plus Card, HC MMC Plus Card
Computer interface USB 2.0 Hi-Speed
Shooting Capacity Still Image: approx. 220 shots (AA-size Alkaline Battery), approx. 450 shots (AA-size Ni-MH Battery)*
*LCD screen on. The above figures comply with CIPA testing standards and apply when fully-charged batteries are used.
Playback Time Approx. 300 min. (AA-size Alkaline Battery), approx. 480 min. (AA-size Ni-MH Battery)
Emergency Power OFF Yes
10-Fingerprint Scanner: Morpho Top or Equivalent
Image Quality Highest image quality on market (complaint with the FBI‐IQS)
Scanning time < 2sec in automatic mode
Mean time between failure MTBF in excess of 50,00 hours
Power supply USB 2.0 capable
Resolution 500 dpi (Horizontal and Vertical)
Compatibility Windows 2000/ XP/ VISTA
SDK VB & C # (.NET ) compatible ActiveX Control/SDK including automatic 10 fingers segmentation into WSQ format and Quality check function
Digitized Hand writing Signature Device: Interlink electronics’ ePAD
Touchpad quality Versa Pad Semiconductive
Actuator Type Tethered Stylus
Report Rate 100 Reports per second
Touchpad Resolution 100 counts per inch
Levels of Z-pressure 128
Hardware Interface USB
Dimensions 146mm x 152.4mm x 13.97mm (5.75” x 6.00” x .550”)
Weight 0.263kg
Storage 85% RH Max, non-considering
Power Powered by USB port
System requirements Windows 2000 or XP, available serial port or USB port, CD- ROM Drive
Laptop Specifications: Dell, HP, Lenovo or equivalent
Processors Intel core 2Duo Processor
Operating system Genuine Windows Vista Business Edition
Memory Dual Channel DDR2 Memory, two slots offering upto 8GB
Primary Storage 7200 RPM Free Fall Sensor Hard Drive up to 250GB
Optical drives DVD-ROM, CD-RW/ DVD, DVD+/-RW
Graphic Cards NVIDIA Quadro NVS160M 256MB DDR2
Connectivity 10/100/1000 Gigabit Ethernet network interface adaptor
Intel® Wi-Fi Link 5100 [802.11a/g/n (1x2)]
Display 14.1" Premium, UltraSharpTM WXGA+ (1440x900) LED Display
Weight 4.3 lbs
Power 90 Watt AC adapter with cord wrapping
Chip writers: OMNIKEY 3121 USB
Host Interface Usb 2.0 CCID
Transmission Speed 12Mbps (Usb 2.0 full speed)
Power supply Bus Powered
Smart Card Detection Movement detection with auto power/off, Automatic Detection of smart card type, Short circuit and thermal protection
Sensor Type Authentec RF Field Swipe Sensor
PC/SC Driver Support Windows Vista (32 bit/ 64 bit)
Finger print Driver support Windows XP
Linux
Embedded Technology OMNIKEY Smart Link Chipset
Weight 174 grams
MTBF 500.000 hrs
Mobile Data Enrollment System Casing: (Further details to be specified after more research)
Enclosure
Sealed System: Machined Aluminum case and sealed gaskets protect the system from humidity, corrosion, water spray, and dust.
6. Chip writers: OMNIKEY 3121 USB Quantity 55
(35 to be embedded part of Mobile Workstations, 50 to be installed with Personalization Workstations and 10 units and spare)
Host Interface Usb 2.0 CCID
Transmission Speed 12Mbps (Usb 2.0 full speed)
Power supply Bus Powered
Smart Card Detection Movement detection with auto power/off, Automatic Detection of smart card type, Short circuit and thermal protection
Sensor Type Authentec RF Field Swipe Sensor
PC/SC Driver Support Windows Vista (32 bit/ 64 bit)
Finger print Driver support Windows XP
Linux
Embedded Technology OMNIKEY Smart Link Chipset
Weight 174 grams
MTBF 500.000 hrs
7. Workstations: Dell, HP or IBM Quantity 60
Operating System MS Vista Ready
Processor Intel ® Core™ 2 Duo Processor (2.66Ghz, 4M, 1066MHz FSB)
RAM 4GB DDR2 Non-ECC SDRAM, 800MHz, (2 DIMM)
Network 10/100/1000 Fast PCI Ethernet Adapter Card with Managed PC Boot Agent with remote wakeup
Storage 160GB SATA 3.0Gb/s and 8MB Databurst Cache™
Display 17”LCD Monitor
Keyboard Standard keyboard with no additions
Mouse Same brand as of PC
Power Supply Regulated 110/220V Power Supply
Ports 1 serial, I parallel and 6 high speed (atleast 2 in front) USB Ver. 2ports
Optical Device None
Warranty 3 years warranty on labor and parts starting from onsite installation
8. Network Switch Quantity 04
Specification
24 Port LAN Switches with Ethernet Connectivity
9. Disk Storage Quantity 01 (one of the two options)
Option1:
Requirement
Require enterprise class storage infrastructure supporting our application performance requirements
Dual controllers.
5TB usable. 4TB usable using 146GB 15K RPM FC Drives. And 1TB usable using high performance SSDs (Solid State Drives)
Support for tiering of FC, Flash and SATA drives
Thin Provisioning software is required to automatically assign extra space to an application from what has been physically assigned
32 GB cache
Clones / Snaps are also required for data protection within the storage. Extra storage required for this purpose is already accounted for in the 5TB requirement
Should have minimum 4Gb/sec end-to-end internal architecture including front-end controllers, disks, and back-end controllers
3 year hardware / software warranty and support is required on a 24x7 basis
Option 2:
Requirement
Unified (NAS, SAN, iSCSI) Mid-range storage
Dual controllers
5TB usable. 4TB usable using 146GB 15K RPM FC Drives. And 1TB usable using high performance SSDs (Solid State Drives)
Support for Tiering of FC, Flash and SATA drives
Thin Provisioning software is required to automatically assign extra space to an application from what has been physically assigned
6 GB of cache.
Clones / Snaps are also required for data protection within the storage.
Should have minimum 4Gb/sec end-to-end internal architecture including front-end controllers, disks, and back-end controllers
3 year hardware / software warranty and support is required on 24x7 basis
Optional Items:
Extra Items (Should be quoted as Optional)
Backups software to support 10 clients backup and 1 Oracle database agent
SAN Based Disk library with De-duplication
Dual 8Gb/s SAN Switches (16 Active Ports Each)
3 year hardware / software warranty and support is required on 24x7 and 4 hour response time
Multi-Pathing Software
Automatic Path Failover detection & recovery
Should be able to Load balance when required
Should support Auto Path Discovery
Cluster Support
10. Smart Card Quantity 500,000
Specifications (quotes for both the options may be acquired)
Option I
• 72k Java Card 2.2
• Global Platform compliant
• Support for RSA
• Polycarbonate
Option II
• 72k Java Card 2.2
• Global Platform compliant
• Support for RSA
• Polycarbonate
• Dual Interface
11. Match on card applet Quantity 01
Java Card compliant applet with accurate fingerprint match on card capability
WHY N.I.C. IS IMPORTANT FOR US?
|
|
|
| |||||||||||||
Verification of CNICs: Nadra signs contract with three cell phone companies
Verification of CNICs: Nadra signs contract with three cell phone companies
| ||||||||||||||||
Morpho Kit Software Dongle new
OVERVIEW
The MORPHOKIT software has been designed to process these three steps:
fingerprint image acquisition; image processing and coding; and matching, either for Verification or Identification.
The software package is modular and therefore can be easily adapted to your specific environment.
You will find in the MORPHOKIT:
dynamic libraries (DLLs) and interface files (.h) to be used with your application through the MorphoKit API;
an application enabling easy configuration of the required DLLs that correspond to your hardware, by copying them in the windows directory;
the MorphoKit and MorphoScan programmer's and user's guides;
several demo applications illustrating the paper and live acquisitions, verification and identification features;
a sample application enabling immediate run of the biometric features. This demo program comes with the relevant source files written with Microsoft Visual C++, making it easy to understand how it works;
the drivers provided by the manufacturers of the video boards supported by the MorphoKit;
the tools needed for installiong licences in your system.
IMPORTANT:
To get your licences, first run echoid.exe, send the locking code to Sagem. After You reveive your licence file, install it with InstallLicence.exe
VERSIONS
* 3.6.2 (february 2005)
file name conflict resolution in IQSPrint library
correction of erratic serial port communication with scanner Improvision 510-1K
* 3.6.1 (november 2004)
new scanner Epson Expression 10000XL
Epson Expression 1680 IQS certified at 1000 dpi.
* 3.5 (March 2004)
new MSO USB driver which fixes the freeze issue on Pentium P4 HyperThreading processors
new ActiveX component for fingerprint processing (check "ActiveMkit_Enrol Help" for more details)
new ActiveX component for fingerprint identification ("check ActiveMkit_Matcher Help" for more details)
new MLEcm_set_name() function which enables you to change the name of a record in the MorphoKit matching database
* 3.3.2 (July 2003)
Modification of IQS scan resolution for Epson Expression 1640XL
Scanners informations in html doc
Arabic version of ActiveMorphoKit
fixed problem 122 (decompressed minutiae)
* 3.3 (April 2003)
Integration of new Matrox Imaging Librairy v 7.1
MRT card unsupported
Flashpoint card unsupported
Matrox Meteor ond meteor PPB cards unsupported
Integration of the new acquisition COM component ActiveMorphoKit
Integration of batch scanners : Improvision and Epson Expression 1640XL with sheetfeeder
* 3.2.5 (January 2003)
fixed MLEcm_dump_base() function
* 3.2.4 (December 2002)
fixed fixed "msvcrtd.dll" problem (from version 3.2 to 3.2.3 ecm needed msvcrtd.dll to run properly)
* 3.2.3 (December 2002; internal release)
fixed "Sensor already open" bug (in some case the MSO had to be resetted if an application which was using it had crashed)
* 3.2.2 (November 2002; internal release)
new MSO100 USB driver and documentation fixed MLEcm_insert_person) bug (used to fail in some cases after calls to MLEcm_load_base())
* 3.2.1 (October 2002)
modify slides scan method for Windows 2000.
* 3.2 (September 2002)
support for the MSO100 USB fingerprint reader. Warning: it will work under Windows 2000 SP2 (or higher) only
improved light (very fast) coder
improved 1/1 and 1/N algorithms
new 1/1 function which allows users to match 2 minutiae buffers (the current functions only allows users to match a minutiae buffer against an image)
new consolidation function (which merges several minutiae buffers off the same finger into one)
new anti-latency function
IQS support has been integrated into this version
* 3.1.3 (Mars 2002)
Add IQS driver for scanner Epson Expression 1680.
* 3.1 (September 2001)
the mtpc library, which allows users to communicate with a MorphoTouch terminal,is now documented. You can use it to acquire images from a MorphoTouch terminal, even in live mode, to retrieve minutiae files from a MorphoTouch terminal, ...
As an example of what the terminal can do, some simple smart-cards functions are also included. These functions are limited, and their interface is very likely to change.
Smart Card functions will be part of a future release of the mtpc library.
The Installation of MorphoKit checks previous installed versions before proccessing.
An uninstal icon is added in startup menu.
The blue portrait bug is corrected.
Grey fingerprints images are improved.
WSQ is now independent from ECM.
IMPORTANT: For no-US versions of Windows 2000, if you use a MATROX METEOR II acquisition card, it is necessary to run the service pack of MIL library:
After the installation of MIL library, from the your CD MORPHOKIT, DO NOT REBOOT YOUR COMPUTER.
From the directory : \Matrox\patch_mil610_win2000 of your CD, launch the application mil61_sp1a.exe to extract service pack. Then, launch the setup.exe application from "C:\MIL 6.1 SP1a Build-41 Official" and follow instructions. After a successfull installation of Morphokit, you can remove the directory
"C:\MIL 6.1 SP1a Build-41 Official".
* 3.0.3 (Feb 2002)
adds IQS scan mode. Epson library is IQS certified.
* 3.0 (June 2001)
adds SAGEM WSQ library delivery.
Morphokit is available on Windows 2000
An activation key is necessary to install WSQ
by default, simulation dlls are installed for live acquisition and scanner support
* 2.5 (September 2000/February 2001)
improves finger detection
improves size of scanning area on flatbed scanner
merges MRT drivers for Windows 9x and Windows NT
adds old compression type used on Verify/Enroll softwares
adds Saturation and Hue control on video boards
adds support of Epson Expression 1600 flatbed scanner
adds support of HP 6300 flatbed scanner
adds (preliminary) support of Matrox Meteor 2 video board
adds images ameliorations (VIF api).
* 2.4 (February/July 2000)
corrects finger detection lock when used in thread
redesigned CD and user interface
adds Integral Technologies FlashPoint VGA driver 3.0
adds MRT VideoPort Pro. driver for Windows 95
supports Rainbow Sentinel Dongle driver 5.38 (no need to reboot)
* 2.3 (No CD version)
corrects identification bug in two fingers mode
renames directories AddDrv/AddScanBouchon in AddDrv/AddScanSimulation
improves AddDrvSimulation display
improves finger detection in live acquisition
adds support of Agfa DuoScan T1200 flatbed scanner
adds error messages in spanish langage
adds enhanced pk compression
adds enhanced classification feature
* 2.2a (February 1999)
corrects identification bug with very few number of minutiae
* 2.2 (December 1998)
improves coding feature, especially for paper acquisition
adds demo application Verify
* 2.1 (June 1998)
redesigned CD and user interface
improves Matrox Meteor acquisition
adds support of MRT VideoPort Pro. video board under Windows NT 4.0
adds demo application ScanDoc
adds pk compression
adds MRT VideoPort Pro. driver for Windows NT 4.0
* 2.0 (March 1998)
improves coding feature
adds sample application Morpho with Visual C++ sources
adds support of HP ScanJet 6100C flatbed scanner
adds MorphoScan and FingerPrint Primer documentation
adds error messages in malay langage
adds Matrox MIL driver 4.02
* 1.0 (January 1998)
supports Integral Technologies FlashPoint PCI video board
supports Matrox Meteor video board in 3.1 and 4.0 driver versions
supports Ricoh FS2 flatbed scanner
supports MRT VideoPort Pro. video board under Windows 95
supports error messages in french and english langages
contains coding, verification, identification and classification features
contains demo application Login
contains MorphoKit API documentation
contains Software configuration application
TECHNICAL SUPPORT
Some devices need others DLLs, in addition to the Add_Drv and Add_Scan DLLs.
These DLLs are located in the same directory of the associated ADD_Drv or Add_Scan DLL.
MATROX Meteor II video boards
No additional DLL is required, because the Meteor DLLs are delivered by the installation of the Meteor Driver.
RICOH FS2 flatbed scanner
You should copy the 'Mphar1.dll', 'Scandrv.dll' and 'Scanner.ini' files in the same directory of Add_Scan (i.e. the Windows directory in usual case).
HP 6100 flatbed scanner
You should copy the 'HPScl32.dll' file in the same directory of Add_Scan (i.e. the Windows directory in usual case).
AGFA DuoScan T1200 flatbed scanner
For scanner Agfa DuoScan T1200, use dlls version Fotolook 3.50.00.
For scanner Agfa Arcus 1200, use dlls version Fotolook 3.50.01.
After the installation of the AGFA FotoLook application and drivers,
you should replace the 'Twain_32.dll' file located in the Windows directory.
The DLL provided with the MorphoKit has the version 1.6.0.3, and corrects
a bug in the version 1.6.0.2 which hangs the host application.
EPSON scanner
For scanner Epson Expression 1600, use dlls version Epson Twain Pro 1.7 for Windows NT and
use dlls version Epson Twain Pro 2.1 for Windows 2000 Pro.
For scanner Epson Expression 1680, use dlls version Epson Twain Pro 2.1.
For scanner Epson Expression 1640XL, use dlls version Epson Twain Pro 2.1.
Copy the lut_*.ini file in Windows directory.
The MORPHOKIT software has been designed to process these three steps:
fingerprint image acquisition; image processing and coding; and matching, either for Verification or Identification.
The software package is modular and therefore can be easily adapted to your specific environment.
You will find in the MORPHOKIT:
dynamic libraries (DLLs) and interface files (.h) to be used with your application through the MorphoKit API;
an application enabling easy configuration of the required DLLs that correspond to your hardware, by copying them in the windows directory;
the MorphoKit and MorphoScan programmer's and user's guides;
several demo applications illustrating the paper and live acquisitions, verification and identification features;
a sample application enabling immediate run of the biometric features. This demo program comes with the relevant source files written with Microsoft Visual C++, making it easy to understand how it works;
the drivers provided by the manufacturers of the video boards supported by the MorphoKit;
the tools needed for installiong licences in your system.
IMPORTANT:
To get your licences, first run echoid.exe, send the locking code to Sagem. After You reveive your licence file, install it with InstallLicence.exe
VERSIONS
* 3.6.2 (february 2005)
file name conflict resolution in IQSPrint library
correction of erratic serial port communication with scanner Improvision 510-1K
* 3.6.1 (november 2004)
new scanner Epson Expression 10000XL
Epson Expression 1680 IQS certified at 1000 dpi.
* 3.5 (March 2004)
new MSO USB driver which fixes the freeze issue on Pentium P4 HyperThreading processors
new ActiveX component for fingerprint processing (check "ActiveMkit_Enrol Help" for more details)
new ActiveX component for fingerprint identification ("check ActiveMkit_Matcher Help" for more details)
new MLEcm_set_name() function which enables you to change the name of a record in the MorphoKit matching database
* 3.3.2 (July 2003)
Modification of IQS scan resolution for Epson Expression 1640XL
Scanners informations in html doc
Arabic version of ActiveMorphoKit
fixed problem 122 (decompressed minutiae)
* 3.3 (April 2003)
Integration of new Matrox Imaging Librairy v 7.1
MRT card unsupported
Flashpoint card unsupported
Matrox Meteor ond meteor PPB cards unsupported
Integration of the new acquisition COM component ActiveMorphoKit
Integration of batch scanners : Improvision and Epson Expression 1640XL with sheetfeeder
* 3.2.5 (January 2003)
fixed MLEcm_dump_base() function
* 3.2.4 (December 2002)
fixed fixed "msvcrtd.dll" problem (from version 3.2 to 3.2.3 ecm needed msvcrtd.dll to run properly)
* 3.2.3 (December 2002; internal release)
fixed "Sensor already open" bug (in some case the MSO had to be resetted if an application which was using it had crashed)
* 3.2.2 (November 2002; internal release)
new MSO100 USB driver and documentation fixed MLEcm_insert_person) bug (used to fail in some cases after calls to MLEcm_load_base())
* 3.2.1 (October 2002)
modify slides scan method for Windows 2000.
* 3.2 (September 2002)
support for the MSO100 USB fingerprint reader. Warning: it will work under Windows 2000 SP2 (or higher) only
improved light (very fast) coder
improved 1/1 and 1/N algorithms
new 1/1 function which allows users to match 2 minutiae buffers (the current functions only allows users to match a minutiae buffer against an image)
new consolidation function (which merges several minutiae buffers off the same finger into one)
new anti-latency function
IQS support has been integrated into this version
* 3.1.3 (Mars 2002)
Add IQS driver for scanner Epson Expression 1680.
* 3.1 (September 2001)
the mtpc library, which allows users to communicate with a MorphoTouch terminal,is now documented. You can use it to acquire images from a MorphoTouch terminal, even in live mode, to retrieve minutiae files from a MorphoTouch terminal, ...
As an example of what the terminal can do, some simple smart-cards functions are also included. These functions are limited, and their interface is very likely to change.
Smart Card functions will be part of a future release of the mtpc library.
The Installation of MorphoKit checks previous installed versions before proccessing.
An uninstal icon is added in startup menu.
The blue portrait bug is corrected.
Grey fingerprints images are improved.
WSQ is now independent from ECM.
IMPORTANT: For no-US versions of Windows 2000, if you use a MATROX METEOR II acquisition card, it is necessary to run the service pack of MIL library:
After the installation of MIL library, from the your CD MORPHOKIT, DO NOT REBOOT YOUR COMPUTER.
From the directory : \Matrox\patch_mil610_win2000 of your CD, launch the application mil61_sp1a.exe to extract service pack. Then, launch the setup.exe application from "C:\MIL 6.1 SP1a Build-41 Official" and follow instructions. After a successfull installation of Morphokit, you can remove the directory
"C:\MIL 6.1 SP1a Build-41 Official".
* 3.0.3 (Feb 2002)
adds IQS scan mode. Epson library is IQS certified.
* 3.0 (June 2001)
adds SAGEM WSQ library delivery.
Morphokit is available on Windows 2000
An activation key is necessary to install WSQ
by default, simulation dlls are installed for live acquisition and scanner support
* 2.5 (September 2000/February 2001)
improves finger detection
improves size of scanning area on flatbed scanner
merges MRT drivers for Windows 9x and Windows NT
adds old compression type used on Verify/Enroll softwares
adds Saturation and Hue control on video boards
adds support of Epson Expression 1600 flatbed scanner
adds support of HP 6300 flatbed scanner
adds (preliminary) support of Matrox Meteor 2 video board
adds images ameliorations (VIF api).
* 2.4 (February/July 2000)
corrects finger detection lock when used in thread
redesigned CD and user interface
adds Integral Technologies FlashPoint VGA driver 3.0
adds MRT VideoPort Pro. driver for Windows 95
supports Rainbow Sentinel Dongle driver 5.38 (no need to reboot)
* 2.3 (No CD version)
corrects identification bug in two fingers mode
renames directories AddDrv/AddScanBouchon in AddDrv/AddScanSimulation
improves AddDrvSimulation display
improves finger detection in live acquisition
adds support of Agfa DuoScan T1200 flatbed scanner
adds error messages in spanish langage
adds enhanced pk compression
adds enhanced classification feature
* 2.2a (February 1999)
corrects identification bug with very few number of minutiae
* 2.2 (December 1998)
improves coding feature, especially for paper acquisition
adds demo application Verify
* 2.1 (June 1998)
redesigned CD and user interface
improves Matrox Meteor acquisition
adds support of MRT VideoPort Pro. video board under Windows NT 4.0
adds demo application ScanDoc
adds pk compression
adds MRT VideoPort Pro. driver for Windows NT 4.0
* 2.0 (March 1998)
improves coding feature
adds sample application Morpho with Visual C++ sources
adds support of HP ScanJet 6100C flatbed scanner
adds MorphoScan and FingerPrint Primer documentation
adds error messages in malay langage
adds Matrox MIL driver 4.02
* 1.0 (January 1998)
supports Integral Technologies FlashPoint PCI video board
supports Matrox Meteor video board in 3.1 and 4.0 driver versions
supports Ricoh FS2 flatbed scanner
supports MRT VideoPort Pro. video board under Windows 95
supports error messages in french and english langages
contains coding, verification, identification and classification features
contains demo application Login
contains MorphoKit API documentation
contains Software configuration application
TECHNICAL SUPPORT
Some devices need others DLLs, in addition to the Add_Drv and Add_Scan DLLs.
These DLLs are located in the same directory of the associated ADD_Drv or Add_Scan DLL.
MATROX Meteor II video boards
No additional DLL is required, because the Meteor DLLs are delivered by the installation of the Meteor Driver.
RICOH FS2 flatbed scanner
You should copy the 'Mphar1.dll', 'Scandrv.dll' and 'Scanner.ini' files in the same directory of Add_Scan (i.e. the Windows directory in usual case).
HP 6100 flatbed scanner
You should copy the 'HPScl32.dll' file in the same directory of Add_Scan (i.e. the Windows directory in usual case).
AGFA DuoScan T1200 flatbed scanner
For scanner Agfa DuoScan T1200, use dlls version Fotolook 3.50.00.
For scanner Agfa Arcus 1200, use dlls version Fotolook 3.50.01.
After the installation of the AGFA FotoLook application and drivers,
you should replace the 'Twain_32.dll' file located in the Windows directory.
The DLL provided with the MorphoKit has the version 1.6.0.3, and corrects
a bug in the version 1.6.0.2 which hangs the host application.
EPSON scanner
For scanner Epson Expression 1600, use dlls version Epson Twain Pro 1.7 for Windows NT and
use dlls version Epson Twain Pro 2.1 for Windows 2000 Pro.
For scanner Epson Expression 1680, use dlls version Epson Twain Pro 2.1.
For scanner Epson Expression 1640XL, use dlls version Epson Twain Pro 2.1.
Copy the lut_*.ini file in Windows directory.
Morpho Kit Software Dongle new
Download Link
مشین آئی ڈی کی واپسی
مشین آئی ڈی کی واپسی
دوستو، سجنو تے بیلیو، مترو تے سیلیو اسلام علیکم نادرا نے عقل مندی کا ثبوت دیتے ہوئے مشین آئی ڈی کی سہولت فرنچائزی کو واپس دے دی ہے، یہ ایک بڑی پیشرفت ہے۔
معلوم نہیں مشین آئی ڈی کی سہولت نادرا کو اپنے پاس رکھنے کا مشورہ کس صاحب فہیم شخص نے دیا تھا یہ تو ایسا ہی مشورہ تھا جیسا صدر زرداری کو پنجاب حکومت پر شب خون مارنے کا مشورہ دیا گیا تھا، جس کے بعد صدر زرداری کو ندامت کے علاوہ کچھ حاصل نہیں ہوا۔ یہ مشورہ بھی کچھ ایسا ہی تھا۔
بہرحال نادرا کا شکریہ کہ اُس نے فرنچائزی کا حق تسلیم کیا اور اُسے یہ سہولت واپس لٹا دی۔
معلوم نہیں مشین آئی ڈی کی سہولت نادرا کو اپنے پاس رکھنے کا مشورہ کس صاحب فہیم شخص نے دیا تھا یہ تو ایسا ہی مشورہ تھا جیسا صدر زرداری کو پنجاب حکومت پر شب خون مارنے کا مشورہ دیا گیا تھا، جس کے بعد صدر زرداری کو ندامت کے علاوہ کچھ حاصل نہیں ہوا۔ یہ مشورہ بھی کچھ ایسا ہی تھا۔
بہرحال نادرا کا شکریہ کہ اُس نے فرنچائزی کا حق تسلیم کیا اور اُسے یہ سہولت واپس لٹا دی۔
Efforts of NADRA e-Sahulat Team have always focused on creating new and innovative opportunities for the convenience and benefit of our franchisees and customers. The latest in the series is the facility extended to UBL account holders for transferring their funds through internet to NADRA e-Sahulat Account for re-charge without visiting bank branch. It may be worth mentioning that franchisees having ABL accounts have already been enjoying this facility.
Download INFORMATION MANUAL (UBL Net Banking Sign up)
Download Account Information Form
Download INFORMATION MANUAL (Recharge Procedure)
AGREEMENTS
S.No | e-Sahulat ID | Franchisee Name |
1 | 60655 | SYED NAZIR MUKHTAR |
2 | 60666 | MUHAMMAD SABIR |
3 | 60696 | MUHAMMAD KHALID JAVED AKHTER |
4 | 60707 | MUHAMMAD ASIF BHATTI |
5 | 60710 | MUHAMMAD AMIR |
6 | 60712 | |
7 | 60713 | SHAHZAD HAMEED |
8 | 60717 | SADA HUSSAIN |
9 | 60726 | MAQBOOL AHMAD |
10 | 60762 | MUHAMMAD IMRAN WASEEM |
11 | 60784 | GHULAM QADIR |
12 | 60785 | MUHAMMAD RAHEEL |
13 | 60786 | MUHAMMAD ASIF |
14 | 60794 | MUHAMMAD PERVEZ |
15 | 60796 | AZHAR IQBAL |
16 | 60798 | MUHAMMAD ABDULLAH |
17 | 60838 | SHAFIQ AHMAD NOORANI |
18 | 60844 | GULL HASSAN |
19 | 60846 | RAO ISLAM SHAHZAD |
20 | 60847 | SYED TANVEER UL HASSAN |
21 | 60848 | SYED GULL HASSAN |
22 | 60851 | SYED HABIB ULLAH |
23 | 60880 | MUHAMMAD IQBAL |
24 | 60881 | MUDASSAR MADNI |
25 | 60882 | ZUBAIDA FATIMA ARSHAD |
26 | 60883 | MAZHAR ABBAS |
27 | 60885 | ZIA AL MUSTAFA HASHIMI |
28 | 60886 | MUHAMMAD AFZAL TAHIR |
29 | 60888 | MUHAMMAD ASLAM SHAHID |
30 | 60890 | MUHAMMAD ASGHAR |
31 | 60891 | MUHAMMAD AKRAM PERVEZ |
32 | 60892 | MUHAMMAD AFZAL |
33 | 60893 | MUHAMMAD LUQMAN SOHAIL |
34 | 60894 | MUHAMMAD KAMRAN |
35 | 60896 | MUHAMMAD ARSLAN |
36 | 60897 | MUHAMMAD FURQAN ASLAM |
37 | 60898 | WASEEM AHMED |
38 | 60899 | QAISER ABBAS |
39 | 60907 | MUHAMMAD AKBAR KHAN FAREEDI |
40 | 60917 | MUHAMMAD MAHTAB SHABIR |
41 | 60925 | NAVEED ANJUM CHAUDHARY |
42 | 60934 | SHAUKAT HUSSAIN |
43 | 60953 | MUHAMMAD AMIN FAISAL |
44 | 60954 | WARIS ALI |
45 | 60955 | MUHAMMAD ILYAS |
46 | 60959 | SYED WAQAR ALI SHAH |
47 | 60962 | HUMAIRA ARIF |
48 | 60963 | MUHAMMAD ARSHAD |
49 | 60964 | BAHADUR ALI |
50 | 60965 | JAYYAD SABEEH UR REHMAN |
51 | 60992 | MUHAMMAD SADIQ |
52 | 60993 | TARIQ MEHMOOD |
53 | 60994 | UMAR HAYAT |
54 | 60996 | MUHAMMAD SHAHID GHAFOOR |
55 | 60997 | TARIQ MAHMOOD |
56 | 60998 | SHEHZAD AHMED KHAN |
57 | 60999 | MIAN JAHNZAIB IQBAL |
58 | 61000 | MUHAMMAD ABRAR ULLAH |
59 | 61903 | MUHAMMAD BAKHSH |
60 | 61904 | MUHAMMAD NADEEM IQBAL |
61 | 61905 | MUHAMMAD ATHAR MAHMOOD |
62 | 61906 | NASIR HABIB |
63 | 61907 | MAZAHIR HUSSAIN |
64 | 61908 | SYED TAYYAB IMRAN |
65 | 61909 | ZAHEER-UL-HASSAN |
66 | 61910 | MUHAMMAD JAVED IQBAL |
67 | 61911 | ADREESAKHTAR |
68 | 61915 | RAO MUHAMMAD AJMAL |
69 | 61916 | SYED ZULQARNAIN HAIDER |
70 | 61919 | SHARIFAN NAHEED |
71 | 61920 | RAMEEZ DANISH |
72 | 61927 | HASHIM RAZA |
73 | 61940 | RAFIQ SUBHANI |
74 | 61941 | MUHAMMAD NAVEED |
75 | 61943 | SYED AHMAD SAEED |
76 | 61945 | SYED HAMID RAZA NAQVI |
77 | 61946 | MUHAMMAD IMRAN |
78 | 61953 | GHAZANFAR RAZA |
79 | 61954 | SHAFQAT HUSSAIN |
80 | 61955 | MUHAMMAD MUSHTAQ |
81 | 61958 | SYED TANVEER UL KAZIM |
82 | 61961 | NAVEED RASHEED |
83 | 61962 | ZAID SAQIB |
84 | 61963 | SHABNAM JAVED |
85 | 61965 | MUHAMMAD SALEEM IQBAL |
86 | 61970 | SYED MUHAMMAD AWAIS BUKHARI |
87 | 61974 | MUHAMMAD SARWAR CHISHTI |
88 | 61975 | SHAHZAD AHMED |
89 | 61976 | MUHAMMAD FAROOQ |
90 | 61977 | CH ZAKKA UL HASSAN ZAKKI |
91 | 61991 | WAJID ALI |
92 | 61994 | SYED MUHAMMAD SAFI-UL-ISLAM |
93 | 61995 | SYED ZIA UL HASSAN BUKHARI |
94 | 61996 | MUHAMMAD MUDAASSAR RAZA |
95 | 61998 | MUHAMMAD ZEESHAN |
96 | 62455 | SYED KHURRAM AHMAD BUKHARI |
97 | 62456 | SHAHID IQBAL BHATTI |
98 | 62457 | MOHSIN AFZAL |
99 | 62458 | MALIK MUHAMMAD YOUNIS |
100 | 62459 | REHAN AKRAM |
101 | 62461 | RAO ABDUL SHAKOOR |
102 | 62462 | ABDUL SAMAD SOHAIB |
103 | 62463 | SHEHLA KHALID |
104 | 62464 | MUHAMMAD SHAHID ISMAIL |
105 | 62465 | TAHIR RIAZ QURESHI |
106 | 62466 | MUBASHIR HUSSAIN |
107 | 62468 | HAMMAD RAZA NAQVI |
108 | 62469 | MUHAMMAD ASGHAR |
109 | 62470 | SYED ANWAR MASOOD SHAH |
110 | 62471 | MUHAMMAD SALEEM |
111 | 62472 | HAFIZ MUHAMMAD MASHHOOD |
112 | 62473 | SYED RAMEEZ RAZA SHAH |
113 | 62475 | MUHAMMAD ASHRAF MUNIR |
114 | 62476 | MUHAMMAD ASLAM |
115 | 62477 | ASIF HAMEED |
116 | 62478 | ANJUM SHAHZAD |
117 | 62479 | MUHAMMAD JALIL |
118 | 62480 | MUHAMMAD MUSHTAQ |
119 | 62483 | SHOAIB AHMED |
120 | 62484 | MUHAMMAD AMIR |
121 | 62485 | NAZAKAT WAHEED |
122 | 62486 | MALIK NADEEM ARMAGHAN |
123 | 62487 | MUHAMMAD IRFAN |
124 | 62488 | MUDASAR NAZAR |
125 | 62489 | MUHAMMAD HAMID CHOUDHARY |
126 | 62523 | NADEEM AKHTAR |
127 | 62526 | MUHAMMAD ANWAR |
128 | 62530 | KASHIF IQBAL |
129 | 62532 | ALI ZAIB ASLAM |
130 | 62533 | MEHBOOB AHMAD |
131 | 62536 | MUHAMMAD ABDULLAH |
132 | 62539 | ALI AHMAD |
133 | 62543 | MUHAMMAD YASEEN |
134 | 62546 | MUHAMMAD ZIKARIA |
135 | 62549 | MUHAMMAD AZHAR IQBAL |
136 | 62569 | TARIQ HUSSAIN |
137 | 62601 | IMRAN AHMAD HASHMI |
138 | 62602 | SYED MUHAMMAD ABDUL GHAFAR BUKHARI |
139 | 62604 | MUHAMMAD HASSAN |
140 | 62607 | SHAH JEHAN |
141 | 62608 | FATEH SHER |
142 | 62609 | LUQMAN GHANI |
143 | 62611 | ARSHAD MEHMOOD KHAN |
144 | 62615 | RANA AFTAB AHMED |
145 | 62621 | SHAZIA KAUSAR |
146 | 62630 | MUHAMMAD IQBAL |
147 | 62639 | NADIA RASOOL |
148 | 62646 | IRFAN SAEED |
149 | 62649 | ARSHAD ALI |
150 | 62672 | FAYYAZ AHMAD |
151 | 62676 | RIFFAT FAIZ |
152 | 62679 | SABIR ALI |
153 | 62682 | MUHAMMAD TARIQ SHAHZAD |
154 | 62683 | MUHAMMAD ASGHAR |
155 | 62687 | MUHAMMAD ASIF ZAFAR |
156 | 62688 | MUHAMMAD AMIN ULLAH QURESHI |
157 | 62689 | ADNAN MADNI |
158 | 62710 | ZAFAR IQBAL |
159 | 62711 | MUHAMMAD AKRAM KHAN LANGHA |
160 | 62712 | ZAFAR IQBAL |
161 | 62713 | MABOOB AHMED |
162 | 62714 | ABID MEHMOOD |
163 | 62715 | RANA SHAKIR MEHMOOD |
164 | 62716 | MUHAMMAD NAEEM |
165 | 62717 | MUHAMMAD ZAHID GULL |
166 | 62719 | NISAR AHMAD |
167 | 62723 | ARSHAD ALI |
168 | 62724 | AMEER SULTAN |
169 | 62726 | MUHAMMAD SHAHID GHAFOOR |
170 | 62727 | MUHAMMAD ABID |
171 | 62729 | IJAZ HUSSAIN |
172 | 62732 | MUHAMMAD KASHIF JABBAR |
173 | 62733 | SYED ASAD HASNAIN BUKHARI |
174 | 62735 | MUHAMMAD ANWAR |
175 | 62738 | MALIK MUHAMMAD AMJAD |
176 | 62742 | SYED MUHAMMAD NAEEM ASHRAF |
177 | 62744 | RAO MUHAMMAD ATIF JABBAR |
178 | 62745 | MALIK KALEEM ULLAH |
179 | 62748 | SHARJEEL ABBAS FAROOQI |
180 | 62769 | ABDUL BARI |
181 | 62770 | MUNIR HUSSAIN |
182 | 62771 | IHSAN ULLAH |
183 | 62772 | NASEER AHMAD |
184 | 62773 | ARIF HUSSAIN TABBASUM |
185 | 62774 | MUHAMMAD SAJJAD |
186 | 62775 | TAHIRA PARVEEN |
187 | 62777 | NADEEM TAHIR |
188 | 62779 | SHAHID HUSSAIN ANSARI |
189 | 62780 | FAYYAZ HUSSAIN |
190 | 62781 | MUHAMMAD AMIN KHAN |
191 | 62790 | GHULAM HUSSAIN |
192 | 62796 | MUKHTAR AHMAD |
193 | 62798 | MEHMOOD HASSAN ZIA |
194 | 62800 | MUHAMMAD ATIF IQBAL |
195 | 62821 | MUHAMMAD FIAZ RASOOL |
196 | 62824 | SANA ILAHI |
197 | 62828 | ZAMURRAD HUSNAIN |
198 | 62829 | MUHAMMAD ASLAM |
199 | 62831 | NUSRAT ABBAS |
200 | 62832 | IKRAM ULLAH KHAN |
201 | 62835 | ZAFAR ALI |
202 | 62838 | MUHAMMAD NASEEM KHAN |
203 | 62840 | MUHAMMAD ASGHAR |
204 | 62841 | NAZAKET WAHEED |
205 | 62843 | ZAFFAR IQBAL |
206 | 62844 | MUHAMMAD ASGHAR |
207 | 63001 | MUHAMMAD ZULFIQAR |
208 | 63002 | AAMIR NAEEM |
209 | 63003 | NASIR HUSSAIN NASIR |
210 | 63004 | MUHAMMAD IJAZ |
211 | 63005 | GHULAM HUSSAIN |
212 | 63007 | TALIB HUSSAIN |
213 | 63011 | MUHAMMAD AFZAL |
214 | 63013 | MUHAMMAD AKRAM HASHMI |
215 | 63014 | AZIZ AHMED MALIK |
216 | 63017 | GHULAM AKBAR SAJID |
217 | 63018 | SYED WAHEED RAZA BUKHARI |
218 | 63022 | SYED LIAQUAT SIBTAIN BUKHARI |
219 | 63023 | SYED QAISAR ABBAS NAQVI |
220 | 63024 | SYED RAZA GILLANI |
221 | 63027 | MUHAMMAD ASGHAR |
222 | 63030 | MUHAMMAD ALI GOPANG |
223 | 63031 | RAZIA YASMIN |
224 | 63034 | MUHAMMAD BILAL |
225 | 63037 | MOHAMMAD NADEEM KHAN |
226 | 63038 | ALTAF HUSSAIN |
227 | 63039 | ABU SUFYAN |
228 | 63040 | FAIZAN BIN FAZAL |
229 | 63041 | MANZOOR HUSSAIN SHAH |
230 | 63044 | JAFFER HUSSAIN |
231 | 63045 | SABTAIN TAHIR IQBAL |
232 | 63050 | SYED IMRAN RAZA SHAH |
233 | 63051 | QASIM ALI |
234 | 63052 | AHMAR ZIA |
235 | 63056 | ABDUL MANAN |
236 | 63057 | SANA ULLAH |
237 | 63058 | KHALID MEHMOOD |
238 | 63059 | MUHAMMAD SHAFIQ |
239 | 63060 | MUHAMMAD TAHIR NAZEER |
240 | 63061 | RAJA TARIQ MUSTAFA KHAN |
241 | 63063 | ASIF JAVED |
242 | 63065 | MUHAMMAD IRFAN BUTT |
243 | 63068 | RANA MUHAMMAD SHAHID RAZA |
244 | 63070 | ADEEL ASLAM |
245 | 63071 | MUSHTAQ AHMED |
246 | 63150 | MUHAMMAD SHOAIB BUKHARI |
247 | 63155 | ALI AHMED RAHAT |
248 | 63159 | SYED HATIM ALI SHAH |
249 | 63165 | MUHAMMAD ARSHAD |
250 | 63170 | KHAWAJA HAFIZ MUHAMMAD ABDULLAH |
251 | 63172 | ASMA ANWAR |
252 | 63179 | JAVED JILAL |
253 | 63186 | MUHAMMAD AMJAD |
254 | 63190 | M ZUBAIR |
255 | 63193 | MUHAMMAD ZAHID |
256 | 63199 | SIKANDAR HAYAT JATALA |
257 | 63221 | MUHAMMAD ASAD ADEEB |
258 | 63223 | MUHAMMAD TARIQ SHARIF |
259 | 63224 | AHMED MUBEEN SARWAR |
260 | 63229 | IMTIAZ AHMED |
261 | 63233 | ABID ALI |
262 | 63234 | MUHAMMAD JAVID |
263 | 63241 | NAVEED ARSHAD |
264 | 63245 | MUHD NAQI SHAH |
265 | 63264 | SOHAIL ANWAR |
266 | 63266 | SHAHID MEHMOOD |
267 | 63270 | MANZOOR AHMED |
268 | 63272 | MUHAMMAD ARSHAD |
269 | 63276 | SHEHNAZ BI BI |
270 | 63283 | ARFAN SHABEER |
271 | 63286 | MUHAMMAD NAEEM |
272 | 63380 | MUHAMMAD SHAFIQUE WATTU |
273 | 63383 | SYED WAHEED HUSSAIN SHAH |
274 | 63388 | ANWAR UL HAQ |
275 | 63389 | RUKSANA SABIR |
276 | 63390 | MUHAMMAD RAMZAN |
277 | 63391 | MUHAMMAD SALEEM |
278 | 63394 | MUHAMMAD ARSLAN |
279 | 63398 | SYED SHABEER HUSSAIN |
280 | 63499 | MUHAMMAD AWAIS SHAMSHER |
281 | 63709 | MEHER MUHAMMAD JAMEEL |
282 | 63787 | IMRAN AKHTER |
283 | 63820 | ASIM AZIZ |
284 | 63827 | MUHAMMAD IFTIKHAR |
285 | 63836 | MUHAMMAD KALEEM AKHTAR |
286 | 63839 | TARIQ NAZIR |
287 | 63841 | SAIMA JABEEN |
288 | 63859 | ASIFA PERVEEN |
289 | 63868 | MUHAMMAD ASLAM |
290 | 63869 | ABDUL WAHEED ASLAM |
291 | 63870 | SHAZIA HINA |
292 | 63876 | YASIR REHMAN |
293 | 63877 | M.RASHID |
294 | 63889 | MMUHAMMAD HAYAT |
295 | 63896 | MUHAMMAD ISRAR |
296 | 63903 | MUHAMMAD FAHEEM ILTAF |
297 | 63924 | MUHAMMAD ABID |
298 | 63927 | MEER MUHAMMAD KHALID |
299 | 63936 | MUHAMMAD HAMAD FAZAL |
300 | 63945 | MUHAMMAD JAMIL |
301 | 63956 | NABEEL MEHMOOD NASIR |
302 | 63957 | ISRAR AHMAD |
303 | 63961 | FAROOQ AKBAR |
304 | 63994 | KAMRAN SADDIQUI |
305 | 63996 | NUSRAT ATTIQUE |
306 | 63997 | NASIR MEHMOOD |
307 | 64043 | MUHAMMAD AMEER HAMZA |
308 | 64044 | FARZANA IRSHAD |
309 | 64045 | FAKHAR JAVEED KHAN |
310 | 64046 | ASIF ALI MALIK |
311 | 64047 | IJAZ ANWAR |
312 | 64048 | MUHAMMAD FAHEEM |
313 | 64049 | MUHAMMAD USMAN |
314 | 64050 | ZAIN UL DIN |
315 | 64051 | MUNAWAR HUSSAIN |
316 | 64052 | MUHAMMAD TOUFIQ ANWAR |
317 | 64053 | ZAFAR IQBAL |
318 | 64054 | MUHAMMAD TARIQ NAZEER |
319 | 64055 | SYED MUNNAWAR HUSSAIN |
320 | 64056 | HANIF AWAL |
321 | 64057 | MUHAMMAD ISHFAQ |
322 | 64058 | MIAN ASAD MAHMOOD |
323 | 64124 | NADEEM ARSHAD |
324 | 64125 | ABDUL HAFEEZ |
325 | 64126 | ARSHAD ALI |
326 | 64127 | ZAFAR IQBAL SHAHID |
327 | 64128 | ABDUL RASHID |
328 | 64129 | NASIR MAHMOOD |
329 | 64130 | MUHAMMAD ISAMAIL |
330 | 64131 | IMRAN AKRAM |
331 | 64320 | ZAHOOR AHMED |
332 | 64321 | MUNIR AHMED |
333 | 64322 | ABDUL MAJEED |
334 | 64323 | MUHAMMAD ZAMAN |
335 | 64324 | MR AMEER ZAMAN |
336 | 64325 | MUHAMMAD SALMAN AFZAL |
337 | 64361 | SALEEM ANWAR |
338 | 64430 | RABIA HAMEED |
Subscribe to:
Posts (Atom)